Mamoun Fellah

1. Administrative Positions
– From Jun 2018: Member of Joint Committee of the University, ABBES Laghrour- Khenchela
University
– From Jun 2017: Member of the administrative board (council of the university, ABBES
Laghrour- Khenchela University
– From Jun 2017: Member of department scientific committees, Mechanical Engineering
Department, ABBES Laghrour- Khenchela University
– From April 2017: Member of department discipline council, Mechanical Engineering
Department, ABBES Laghrour- Khenchela University
– From April 2017: Branch leader mechanical engineering, Mechanical Engineering Department,
ABBES Laghrour- Khenchela University
2. Diplomas
– December 2020: Promotion in full Professor position
– July 2016: Diploma of habilitation thesis to supervise research “HDR” Field: Metallurgy
and Material’s Engineering. Annaba University, Algeria
2
– June 2014: Diploma of “Doctorate” Field: Metallurgy and Material’s Engineering. Annaba
University, Algeria.
– January 2010: Diploma of “magister” Field: Material’s Engineering Option: ”Material’s
damage”, Annaba university, Algeria.
– June 2008: Diploma of Advanced Studies Field: Material’s Engineering (Annaba universityAlgeria.
– June 2007: State Engineer Field: Metallurgy and Material’s Engineering Option : Physical
Metallurgy
– June 2004: D.E.U.A (Diploma of Applied Academic Studies) Branch: Physico- Chemistry
(Annaba university )
– June 2001: Bachelor of Technology option (Mechanical Manufacture).
3. Projects
– 2014 until today: Synthesis, nonstructural, tribological and electrochimichal behaviors of
hipped biomaterials alloys.
– 2010/2014: materials science. Theme: Electrochemical and tribological behavior of a total
heap prosthesis used by Stainless Steel AISI 316L and Ti alloy (Ti-Al-Nb).
– 2009/2010: Damage of Materials. Theme: Metallurgical and tribological behavior of a total
heap prosthesis used by Stainless Steel AISI 316 L.
– 2006/2007: Physico -chemistry. Theme: Corrosion of lead alloys of second generation.
– 2003/2004: Elaboration of Metals Theme: Defects of siderurgical products.
4. Research internship
– 2016 Mechanical, Surface and Materials Processing Laboratory, ENSAM lille, France
– 2012 Mechanical, Surface and Materials Processing Laboratory, ENSAM lille, France
– 2008-2009 Stage of research in Metallurgy and Materials Engineering Laboratory, Corrosion
and Tribology, Annaba University. Algeria
– 2006-2007 Practical Stage in Metallurgy and Materials Engineering Laboratory, corrosion
Annaba University, Algeria.
– 2003-2004 Practical Stage in ARCELOR MITTAL ANNABA
5. Professional experience
– Jun 2014 until now: Associate professor, Mechanical engineering Department, Khenchela
University. Algeria
– 2011 until 2014: WELL TESTING Engineer (Corrosion monitoring Project leader)
SONATRCH COMPANY ENSP GROUP – Direction WELL SERVICES)
and Engineering Cell responsible (commercial, technical, ITT,…)
– 9/2011- 12/2011: Engineer welding and Quality Control at SONATRACH COMPANY
ENGTP (WPS, PQR,..).
– 2010-09/2011: Inspector Quality control, Non Destructive Testing NDT and piping at LEAD
contracting Algeria project LPG3/LDHP SONATRACH HMD Algeria
3
– 2008- 2010: Supervisor quality control (inspection corrosion, welding piping and pipe line) at
SONATRACH DP (HMD) attached by SGS QUALITEST Algeria.
6. International Collaboration
[1] La.Bo.Ma.P, ENSAM, Cluny, Rue Porte de Paris, Cluny, France.
[2] Tribology and Materials Group, Laboratory of Foundry, Badji Mokhtar University, Annaba, B.
O, 12 CP 23000. Algeria.
[3] Mater Sciences Department, ABBES Laghrour – University, Khenchela P.O 1252, 40004,
Algeria.
[4] Mechanical Engineering Department, King Fahd University of Petroleum and Minerals. Box
1180, Dhahran – 31261, KSA.
[5] Department of Physical Metallurgy and Materials Technology, Brandenburg Technical
University, 03046 Cottbus, Germany.
[6] Institute of Pharmacy, Sechenov First Moscow State Medical University, 8 Trubetskaya St.,
bldg. 2, Moscow, 119991, Russian Federation.
[7] National Research Tomsk State University, 36 Lenin Avenue, 634050 Tomsk, Russia.
[8] Arts et Metiers ParisTech, MSMP, 8, Boulevard Louis XIV, 59046 Lille Cedex, France.
[9] ICD-LASMIS, Université de Technologie de Troyes, Pôle Technologique Sud Champagne, 26
Rue Lavoisier, 52800
7. Contributions to research projects
[1] Head of PRFU Project “Performances structurale, Electrochimique et tribologiques des
nouveaux nano biomatériaux ; synthèse caractérisation, Compréhension et développement”
Annaba University, Algeria. Project Code A24N01UN230120180003 (2018-2022).
[1] CNEPRU Project “Contribution à l’étude de la galvanisation à chaud en continu de l’acier A 9
à Arcelor Mittal- Annaba”, Algeria. Projet code J0301120120087 (2015).
[2] Projet CNEPRU, “Contribution à l’étude de la galvanisation à chaud en continu de l’acier A 9 à
Arcelor Mittal – Annaba”, Project code : J0301120120087 (2012-2014).
[3] Membre of Surface Engineering group. Laboratory of Metallurgy and Materials Science
Engineering, Annaba University, Algeria (From 2009 until 2016).
[3] Head of tribology Materials surface and interfaces group. Laboratory of Metallurgy and
Materials Science Engineering, Annaba University, Algeria (From 2009 until 2016).
8. Technical knowledge
– Non destructive Examination: Radiography X and γ, Ultrasonic, Foucault Currents,
Magnetic particles, Liquid Penetrat.
– Certified ASNT level II ( MT & PT)
– Prepared Welding Procedure Specification (WPS) and Procedure Qualification record
(PQR)
– Electrochemical Test Machining (Potentiodynamic Cyclic, Potentiodynamic Polarization
curves log |i|=f (E) and OCP Open circuit potential E=f(t) , …..).
4
– Tribological tests, friction, Wear , ….
– Visual inspection of Pipeline, Piping, Process, steel tanks for storage oil (repair, alteration,
reconstruction, corrosion, sanding and coating …..)
– Destructive Evaluation and Microscopy.
– Heat and thermo chemical treatments.
– X-Ray diffraction Analysis.
– Scanning Electronic Microscopy micrographs analysis.

9. Internationals Publications
[1] Mamoun Fellah, Naouel Hezil, Karima Abderrahim, Mohammed Abdul Samad,
Alex Montagne, Alberto Mejias, Alain Iost, Stephania Kossman, Timofey Chekalkin,
Aleksei Obrosov, Sabine Weiss, Investigating the Effect of Sintering Temperature on Structural
and Tribological Properties of a Nanostructured Ti–20Nb–13Zr Alloy for Biomedical
Applications. In: Li J. et al. (eds) Characterization of Minerals, Metals, and Materials 2020. The
Minerals, Metals & Materials Series. Springer, Cham, (2020), pp 619-629.
https://doi.org/10.1007/978-3-030-36628-5_61. Online ISBN 978-3-030-36628-5, Print
ISBN 978-3-030-36627-8
[2] Mamoun Fellah, Naouel Hezil, Mohammed Zine Touhami, Mohammed A. Hussien, Alex
Montagne, Alberto Mejias, Alain Iost, Stephania Kossman, Timofey Chekalkin, Aleksei
Obrosov, Sabine Weiss, Effect of Sintering Temperature on Mechanical and Tribological
Behavior of Ti–Ni Alloy for Biomedical Applications. In: The Minerals, Metals & Materials
Society (eds) TMS 2020 149th Annual Meeting & Exhibition Supplemental Proceedings. The
Minerals, Metals & Materials Series. Springer, Cham (2020) pp 1701-1710,
https://doi.org/10.1007/978-3-030-36296-6_157 , Online ISBN 978-3-030-36296-6, Print
ISBN 978-3-030-36295-9.
[3] Naouel Hezil, Mamoun Fellah, Alex Montagne, Alain Iost, Aleksei Obrosov, Sabine Weiss,
Removal of Chromium (VI) from Water onto Activated Carbon by Adsorption in Dynamic
Mode. In: The Minerals, Metals & Materials Society (eds) TMS 2020 149th Annual Meeting &
Exhibition Supplemental Proceedings. The Minerals, Metals & Materials Series. Springer,
Cham (2020) pp 855-863 , https://doi.org/10.1007/978-3-030-36296-6_80 ., Online ISBN 978-
3-030-36296-6, ISBN 978-3-030-36295-9.
[4] Mamoun Fellah, Naouel HEZIL, Touhami Mohamed Zine, Mohammed ABDUL SAMAD,
Aleksei OBROSOV, Dmitry O. BOKOV, Ekaterina MARCHENKO, Alex MONTAGNE,
Alain IOST, Akram ALHUSSEIN, Structural, Tribological and Antibacterial Properties
5
(α+β) based Ti-Alloys for Biomedical Applications Journal of Materials Research and
Technology, (2020). https://www.journals.elsevier.com/journal-of-materials-research-andtechnology IF 5.26 ;
https://authors.elsevier.com/tracking/article/details.do?aid=2266&jid=JMRTEC&surname=Ma
moun
[5] Mamoun FELLAH, Naouel HEZIL, Kamel GUERFI, Ridha Djelabi, Alex MONTAGNE, Alain
IOST, Kirili BORODIN, Aleksei OBROSOVE, Mechanistic pathways of cationic and anionic
surfactants sorption by kaolinite in water, Environmental Science and Pollution Research
(2020) Accepted/ IF 3.056
[6] Adel Saoudi, Mamoun Fellah, Naouel Hezil, Djahida Lerari, Farida Khamouli, L’hadi Atoui,
Khaldoun Bachari, Julia Morozova, Aleksei Obrosov Mohammed Abdul Samad, Prediction of
mechanical properties of welded steel X70 pipeline using neural network modeling,
International Journal of Pressure Vessels and Piping 186 (2020) 104153, htt
ps://doi.org/10.1016/j.ijpvp.2020.104153, http://www.elsevier.com/locate/ijpvp
[7] Leila DEKHIL, Nouereddine HANNECHE, Mamoun FELLAH, Mohammed BOUOUDINA &
A. M. Mercier, Structural analysis and densification study of the mechanically alloyed Cr50Ni50
powders, The International Journal of Advanced Manufacturing Technology, 108 (2020) 2515–
2524 https://doi.org/10.1007/s00170-020-05504-6 https://www.springer.com/journal/170/
[8] Adel SAOUDI, Mamoun FELLAH, Amel SEDIK, Djahida LERARI, Farida KHAMOULI,
L’hadi ATOUI, Khaldoun BACHARI, Assessment and statistical correlation of mechanical
properties of double sided single pass submerged arc welded line pipe steel, Engineering
Science and Technology, an International Journal 23 (2020) 452–461
https://doi.org/10.1016/j.jestch.2019.06.006, http://www.elsevier.com/locate/jestech
[9] FELLAH Mamoun, HEZIL Naouel, ABDUL SAMAD Mohammed, TOUHAMI Mohamed
Zine, MONTAGNE Alex, IOST Alain, Alberto MEJIAS, KOSSMAN Stephania “ The Effect of
Milling Time on Structural, Friction and Wear Behavior of Hot Isostatically Pressed Ti–Ni
Alloys for Orthopedic Applications” TMS 2019 148th Annual Meeting & Exhibition
Supplemental Proceedings. 85 (2019) page 865-875 https://doi.org/10.1007/978-3-030-05861-
6_85
[10] Mamoun FELLAH, Naouel HEZIL, Dekhil LEILA, Mohammed ABDUL SAMAD , Ridha
DJELLABI, Stephania KOSMAN, Alex MONTAGNE, Alain IOST, Aleksei OBROSOV,
Sabine WEISS. Effect of sintering temperature on structure and tribological properties of
nanostructured Ti−15Mo alloy for biomedical applications. Trans. Nonferrous Met. Soc. China
29 (11) (2019) 2310−2320, https://doi.org/10.1016/S1003-6326(19)65137-X ,
https://www.sciencedirect.com/journal/transactions-of-nonferrous-metals-society-of-china
[11] Mamoun Fellah, Naouel Hezil, Mohamed Zine Touhami, Aleksei Obrosov, Sabine Weiß, Egor
B. Kashkarov, Andrey M. Lider, Alex Montagne, Alain Iost, Enhanced Structural and
Tribological Performance of Nanostructured Ti–15Nb Alloy for Biomedical Applications,
Results in physics, 15(2019) 102767, https://doi.org/10.1016/j.rinp.2019.102767
http://www.elsevier.com/locate/rinp https://www.journals.elsevier.com/results-in-physics
[12] Mamoun FELLAH, Naouel HEZIL, Mohamed A. HUSSEIN, Mohammed ABDUL SAMAD,
Mohamed ZINE TOUHAMI, Alex MONTAGNE, Alain IOST, Aleksei OBROSOV, Sabine
WEISS, Preliminary investigation on the bio-tribocorrosion behaviour of porous nanostructured
β-type titanium based biomedical alloy, Materials Lettres 257 (2019) 126755,
https://doi.org/10.1016/j.matlet.2019.126755,
http://www.elsevier.com/locate/mlblue , https://www.sciencedirect.com/journal/materials-letters
[13] Mamoun FELLAH, Naouel HEZIL, Ridha DJELLABI, Mohammed ABDUL SAMAD,
Mohammed Zine TOUHAMI, Alex MONTAGNE, Alain IOST. “Rapid and Enhanced
Recovery of Poly-dispersed Nonionic Surfactant (TX-100) From Organic Mediums Using
6
Dehydrated and Rehydrated Kaolin” Applied Clay Sciences 177 (2019) 43-50,
https://doi.org/10.1016/j.clay.2019.05.004 http://www.elsevier.com/locate/clay ,
https://www.sciencedirect.com/journal/applied-clay-science
[14] FELLAH Mamoun, HEZIL Naouel, ABDUL SAMAD Mohammed, DJELLABI Ridha,
MONTAGNE Alex, MEJIAS Alberto, KOSSMAN Stephania, IOST Alain, PURNAMA
Agung, Obrosov Aleksei, and WEISS Sabine, Effect of Molybdenum Content on Structural,
Mechanical, and Tribological Properties of Hot Isostatically Pressed b-Type Titanium Alloys
for Orthopedic Applications, Journal of Materials Engineering and Performance, 28(10) (2019)
5988–5999 https://doi.org/10.1007/s11665-019-04348-w ,
https://www.springer.com/journal/11665
[15] AISSANI Linda, FELLAH Mamoun, RADJEHI Lamia, MONAGNE Alex, ELHUSSEIN
Akram, “Effect of annealing treatment on the microstructure, mechanical and tribological
properties of chromium carbonitride coatings”, Surface and coating technology, 359 (2019)
403-413. https://doi.org/10.1016/j.surfcoat.2018.12.099 ,
http://www.elsevier.com/locate/surfcoat , https://www.journals.elsevier.com/surface-andcoatings-technology
[16] FELLAH Mamoun, AISSANI Linda, ABDUL SAMAD Mohammed, PRAKASAM Mythili,
PURNAMA Agung, MONTAGNE Alex, IOST Alain, MEJIAS Alberto, “Effect of calcination
temperature on friction and wear behavior of α–Alumina (α‐Al2O3) for biomedical
applications”, International journal of applied ceramic technology. 16 (2019) 462–470,
https://doi.org/10.1111/ijac.13116 ,
https://ceramics.onlinelibrary.wiley.com/journal/17447402
[17] HEZIL Naouel, FELLAH Mamoun, “Synthesis, structural and mechanical properties of
nanobioceramic (α-Al2O3)” Journal of the Australian Ceramic Society. 55(2019)1167-1175.
https://doi.org/10.1007/s41779-019-00333-7 , https://www.springer.com/journal/41779
[18] Liela DEKHIL & S. LOUIDI & Mohamed BOUOUDINA, Mamoun FELLAH,
Microstructural, Magnetic, and Nanoindentation Studies of the Ball-Milled Ti80Ni20 Alloy,
Journal of Superconductivity and Novel Magnetism 32 (2019) 3623–3636
https://doi.org/10.1007/s10948-019-05145-1, https://www.springer.com/journal/10948
[19] HEZIL Naouel, FELLAH Mamoun, DJELLABI Ridha, TOUHAMI Mohamed Zine,
MONTAGNE Alex, BOUAKSA Fethia, IOST Alain, MEJIAS Alberto, ALEKSEI Obrosove,
‘Assessment of the Hydrophilic-Hydrophobic Balance of Alumina Oxidized at Different
Temperatures via H2O and C4H10 Vapor Adsorption, Defect and Diffusion Forum,
397,(2019) 161-168, https://doi.org/10.4028/www.scientific.net/DDF.397.161,
https://www.scientific.net/DDF
[20] BOUAKSA Fethia, FELLAH Mamoun, HEZIL Naouel, DJELLABI Ridha, TOUHAMI
Mohamed Zine, IOST Alain, MONTAGNE Alex, KOSMAN Stephania, SABINE
Weiss“Effect of Thermocyclic Treatment with Different Cooling Rates on the Mechanical
Characteristics of 42CD4 Low-Alloy Steel” Defect and Diffusion Forum, 397,(2019) 169-178
https://doi.org/10.4028/www.scientific.net/DDF.397.169 , https://www.scientific.net/DDF
[21] Mohamed Bouleghlem, Moussa Zahzouh, Mohamed Hamidouche, Abdelyamine
Boukhobza, Mamoun Fellah, Cemented Carbides Obtained by Conventional Powder
Metallurgy, International Journal of Engineering Research in Africa, 45 (2019) 1-14.
https://doi.org/10.4028/www.scientific.net/JERA.45.1 , https://www.scientific.net/JERA
Anneé 2018
[22] FELLAH Mamoun, AISSANI Linda, ABDUL SAMAD Mohammed, PURNAMA Agung ,
DJBAILI Hamid, MONTAGNE Alex, IOST Alain, NOUVEAU Corinne, Effect of Zr content
on friction and wear behavior of Cr-Zr-N coating system”, International Journal of Applied
Ceramic Technology. 15 (03) (2018) 701-715, https://doi.org/10.1111/ijac.12833
7
https://ceramics.onlinelibrary.wiley.com/journal/17447402
[23] FELLAH Mamoun, AISSANI Linda, IOST Alain, ZAIRI Amel, MONTAGNE Alex,
MEJIAS Alberto, ”Comportement à l’usure et au frottement de deux biomatériaux AISI 316L
et Ti6Al7Nb pour prothèse totale de hanche”. Matériaux & Techniques 106, (04) 402 (2018) 1-
10, https://doi.org/10.1051/mattech/2018051 , https://www.mattech-journal.org/
[24] FELLAH Mamoun, AISSANI Linda, ZAIRI Amel, ABDUL SAMED Mohamed,
NOUVEAU Corine, TOUHAMI Mohammed Zine, DJEBAILI Hamid, MONTAGNE alex,
IOST Alain “Thermal treatment effect on structural and mechanical properties of Cr-C
coatings”. Transaction of IMF, 96 (02) (2018) 79-85.
https://doi.org/10.1080/00202967.2018.1424403., http://www.tandfonline.com/loi/ytim20
[25] ASSALA Omar, FELLAH Mamoun, MECHACHTI Said, TOUHAMI Mohamed Zine,
KHETTACHE Abd elkader, Bouzabataf B, Weiβ H. and Jiang X., “Preparation and
characterization of diamond-like carbon films prepared by MW/ECR-PACVD process
deposited on 41Cr–Al–Mo7 nitrided steel” Transactions of the IMF, (96) 3 (2018) 1–10,
https://doi.org/10.1080/00202967.2018.1453444 http://www.tandfonline.com/loi/ytim20
[26] S. Serrai, S. Mechachti, O. Benchiheub, S. Boudebane, M. Fellah, and M. Z. Touhami, Effect
of Liquid Salt Bath Nitrocarburizing on Mechanical Properties of Low Alloy Sintered Steels,
Metallofiz. Noveishie Tekhnol., 40 (4) (2018). https://doi.org/10.15407/mfint.40.04.0515,
https://mfint.imp.kiev.ua/en/index.html
[27] AISSANI Linda, FELLAH Mamoun, NOUVEAU Corine,”Structural mechanical and
trobological behavior of reactive sputtered Cr-N and Cr-V-N films, Diffusion Foundations 18
(2018) 27-34. https://doi.org/10.4028/www.scientific.net/DF.18.27 ,
https://www.scientific.net/DF
[28] HEZIL Naouel, FELLAH Mamoun, ASSALA Omar, TOUHAMI Mohamed Zine, GUERFI
Kamel, ”Elimination of chromium (VI) by adsorption onto natural and/or modified Kaolinite,
Diffusion Foundations 18 (2018) 106-112.
https://doi.org/10.4028/www.scientific.net/DF.18.106 , https://www.scientific.net/DF
Année 2017
[29] FELLAH Mamoun, LINDA Aissani, ABDUL SAMAD Mohamed, IOST Alain, TOUHAMI
Mohamed Zine, MONTAGNE Alex, NOUVEAU Corine , ” Effect of replacing vanadium by
nobium and iron on the tribological behavior of HIPed titanium alloys”. Acta Metallurgica
Scinica (English letter), 30 (11) (2017).1089-1099 https://doi.org/10.1007/s40195-017-0652-x ,
https://www.springer.com/journal/40195
[30] FELLAH Mamoun, AISSANI Linda, NOUVEAU Corine, ABDUL SAMED Mohamed,
TOUHAMI Mohamed Zine, MECHACHETI Said, MONTAGNE Alex” Characterization of
R.F magnetron sputtered Cr-N, Cr-Zr-N and Zr-N coatings. Transaction of IMF. 95(05) (2017)
261-268. http://dx.doi.org/10.1080/00794236.2017.1339464.
http://www.tandfonline.com/loi/ytim20
[31] AISSANI Linda, FELLAH Mamoun, ABDUL SAMED Mohamed, NOUVEAU Corine,
MONTAGNE Alex and IOST Alain, “structural and mechanical properties of Cr-Zr-N
coatings with different Zr content”. Surface engineering, 33 (00) (2017). 1-9
http://dx.doi.org/10.1080/02670844.2017.1338378 , http://www.tandfonline.com/loi/ysue20
Année 2016.
[32] FELLAH Mamoun, AISSANI linda, LABAÏZ Mohamed, ABDUL SAMAD Mohamed,
MONTAGNE Alex, ” Friction and wear behavior of biomaterials alloys AISI 316L and Ti-6Al7Nb analyze and discussion”. Trends in Biomaterials and Artificial Organs, 32 (02) (2016) 106-
115. http://biomaterials.org.in/tibao/index.php/tibao/article/view/197.
8
[33] FELLAH Mamoun, ABDUL SAMAD Mohammed, LABAÏZ Mohamed, ASSALA Omar,
“Sliding friction and wear performance of the nano-bioceramic α-Al2O3 prepared by high
energy milling”. Tribology International, 91 (2015) 151-159.
https://doi.org/10.1016/j.triboint.2015.07.006
[34] FELLAH Mamoun, LABAÏZ Mohamed, ASSALA Omar, DEKHIL Leila, ALAIN Iost,
“Tribological behavior of biomaterials for total hip prosthesis”. Trends in Biomaterials and
Artificial Organs, 29 (01) (2015) 22-30.
[35] FELLAH Mamoun, LABAÏZ Mohamed, ASSALA Omar, DEKHIL Leila, ZERNIZ Nawal,
IOST Alain, “Tribological behavior of biomaterial for total hip prosthesis”. Matériaux &
Techniques, 102 (6-7) (2014) 601-612. https://doi.org/10.1051/mattech/2014027
[36] FELLAH Mamoun, LABAÏZ Mohamed, ASSALA Omar, DEKHIL Leila, IOST Alain,
“Tribological behavior of Ti-6Al-4V and Ti-6Al-7Nb Alloys for Total Hip Prosthesis”.
Advances in Tribology, 7 (2014) 13 pages. http://dx.doi.org/10.1155/2014/451387
[37] FELLAH Mamoun, LABAÏZ Mohamed, ASSALA Omar, IOST Alain, “Comparative study
on tribiological behavior of Ti-6Al-7Nb and SS AISI 316L alloys, for Total hip prothesis”. John
Wiley & Sons, Inc.USA. The Minerals, Metals & Materials Society (TMS), 237 (2014) 237-
246. https://doi.org/10.1002/9781118889879.ch32
[38] FELLAH Mamoun, LABAÏZ Mohamed, ASSALA Omar, DEKHIL Leila, AlAIN Iost,
“Tribological behavior of stainless steel AISI 316L for biomedical applications”. TribologyMaterials, Surfaces & Interfaces, 7 (3) (2013) 135-149.
https://doi.org/10.1179/1751584X13Y.0000000032
[39] FELLAH Mamoun, LABAÏZ Mohamed, ASSALA Omar, DEKHIL Leila, “Friction and
Wear Behavior of Ti-6Al-7Nb Biomaterial Alloy”. Journal of Biomaterials and
Nanobiotechnology, 4 (4) (2013) 374. doi: 10.4236/jbnb.2013.44047.
[40] FELLAH Mamoun, LABAÏZ Mohamed, ASSALA Omar, “Tribological Behavior of Friction
Couple: Metal/Ceramic (Used for Head of Total Hip Replacement)”. John Wiley & Sons, Inc.,
USA. Advances in Bioceramics and Porous Ceramics VI, 34 (6) (2013) 45-57.
10. Conferences Proceedings / Chapters
[1] HAMMADI Fouzia, FELLAH Mamoun, HEZIL Naouel, TOUHAMI Mohamed Zine,
Mechanicla and tribological proprietés of Ti6Al4Fe Alloy, 2nd international conference on
tribology, TURKEYTRIB’18, ELITE WORD Prestige HOTEL-TAKSIM. 18-20 April (2018),
Istanbul Turqy. Page 4-10 . ISBN: 978-605-9546-10-2
[2] HEZIL Naouel, FELLAH Mamoun, ABDUL SAMAD Mohamed, TOUHAMI Mohamed Zine,
DEKHIL Leila, MONTAGNE Alex, IOST Alain, Effect of Al Content on tribological Behavior
of Cr-Al-N Coating system 2nd international conference on tribology, TURKEYTRIB’18,
ELITE WORD Prestige HOTEL-TAKSIM. 18-20 April 2018, Page 19 . ISBN: 978-605-9546-
10-2
[3] AİSSANİ Linda, FELLAH Mamoun, NOUVEAU Corinne, MECHRİ Nassira, “Mechanical
and structural properties of thickness on V-C-N films deposited by cathodic magnetron
sputtering system” Proceeding book of third international conferences in Mechanical
Engineering on December 19-21 Istanbul Turqey ; ISBN 978-605-9546-09-6. (2017) page 6.
[4] ASSALA Omar, FELLAH Mamoun, BELAID Mounia, “Sliding Friction and wear
performance of the nano-bioceramic α-Al2O3 prepared by high energy milling. Proceeding
Book of Second international conference on advances in sciences: ICAS 2017 September 13-
15, 2017 TURQEY, ISBN 878-6059546-07-2. (2017) page 23-31.
[5] FELLAH Mamoun, AISSANI Linda, “Effect of milling time on tribological behavior of hot
isostatic pressed biomaterials titanium alloys Ti-6Al-4X (X=Nb, Fe & V)”. Proceeding Book of
9
Second international conference on advances in sciences: ICAS 2017 September 13-15, 2017
TURQEY, ISBN 878-6059546-07-2. (2017) page 110.
[6] AISSANI Linda, FELLAH Mamoun, NOUVEAU Corinne, “The study of physic-chimical
proprieties of chromium carbonitrides on machines steel substrates”. Proceeding Book of
Second international conference on advances in sciences: ICAS 2017 September 13-15, 2017
TURQEY, ISBN 878-6059546-07-2. (2017) page 111.
[7] FELLAH Mamoun, AISSANI Linda, ALLAOUI Abdelhalim, MECHACHETI Said, ABDUL
SAMAD Mohamed, MONTAGNE Alex. “Experimental study of new titanium alloy Ti-6Al4Fe for biomedical Application” proceeding de 3ème Conférence Internationale de Mécanique,
26 et 27 avril 2017. Annaba ˗ Algérie Maison d’Editions Universitaires Annaba 2017. ISNB:
9789961.899502
[8] FELLAH Mamoun, AISSANI Linda, LABAIZ mohamed, NOUVEAU Courine, “Synthesis,
microstructural and tribological characterization of calcined nano-bioceramic α-al2O3,
sintered at different temperatures“ proceeding de Colloque Indentation 2016 12 – 14 Octobre
2016 Lille Groupe d’Indentation Multi Echelle Nord Pas-de-Calais.
http://sam.ensam.eu/handle/10985/11624 or
http://sam.ensam.eu/bitstream/handle/10985/11624/MSMP_INDENTATION_2016104_MON
TAGNE.pdf?sequence=1&isAllowed=y
[7] FELLAH Mamoun, “Sliding friction and wear performance of the nano-bioceramic α-Al2O3
prepared by high energy milling”. Proceedings of the 14th International Conference on
Tribology -SERBIATRIB’15, published by Serbian Tribology Society, Kragujevac. Edited by
A. Vencl (13-15Mai 2015) 485-498 http://tribolab.mas.bg.ac.rs/proceedings.html.
11. Books
[1] FELLAH Mamoun, “Le Ti-6Al-4Fe et ses applications aux biomatériaux ” presse
Académique Francophone, (13 août 2018) 185 pages ISBN-10: 3841620396 ISBN-13: 978-
3841620392
[2] FELLAH Mamoun, La Science Des Polymères: Matériaux polymères, Structures, propriétés et
applications, Maison d’Editions Universitaires Européennes, (14 Aug 2018) 180 pages. ISBN10: 6138423747 ISBN-13: 978-6138423744
[3] FELLAH Mamoun, “Techniques de caractérisation expérimentale des matériaux”. Maison
d’Editions Universitaires Européennes, (8 octobre 2015) 128 pages. ISBN-10: 3841674550 ;
ISBN-13: 978-3841674555 ; EAN: 9783841674555.
[4] FELLAH Mamoun, LABAIZ Mohamed, ASSALA Omar, “Comportement à l’usure et au
frottement d’une biocéramique alumine alpha pour applications biomédicales” Maison
d’Editions Universitaires Européennes, (29 July 2015) 132 pages. ISBN-10: 3841670040,
ISBN- 13: 978-3-8416-7004-5. EAN: 9783841670045.
[5] FELLAH Mamoun, “Méthode d’analyse et Techniques expérimentales I et II”, 3ème année
licence Génie des Matériaux, Université Abbes Laghrour – Khenchela (2015). http://teleens.univ-khenchela.dz/moodle/course/category.php?id=15.
12. Proceeding Editor
[1] Editeur de Proceeding of 7th Annual International Conference on Material Science and Engineering
(ICMSE2019). Volume 562 , IOP Conf. Series: Materials Science and Engineering 562 (2019) 011002
Proceeding: ISBN: 978-1-5108-9389-4. https://iopscience.iop.org/issue/1757-899X/562/1 ;
https://doi.org/10.1088/1757-899X/562/1/011002.
10
[2] Editeur de proceeding The 5th Annual International Conference on Material Engineering and Application
(ICMEA 2018). Volume 484 IOP Conf. Series: Materials Science and Engineering 484 (2019) 011001,
https://iopscience.iop.org/issue/1757-899X/484/1 ; https://doi.org/10.1088/1757-899X/484/1/011001.
[3] Editeur de Proceeding The 4th Annual International Conference on Material Engineering and
Application (ICMEA2017) , Volume 146 Advances in Engineering Research (ISSN : 2352-5401),
Volume 146, ISBN : 978-94-6252-448-4 , (Atlantic Press) , https://www.atlantispress.com/proceedings/icmea-17/publishing
13. Journals Editor Board
[1] Editeur de Journal of Material Science and Research
https://madridge.org/editorial_board_member/Mamoun-Fellah
[2] Editeur : Electrical Science & Engineering, Bilingual Publishing Co.
http://ojs.bilpublishing.com
[3] Editeur : Advances in Materials (AM) Sciences publishing group,
http://www.sciencepublishinggroup.com/j/am
[4] Editeur : Journal of Biotechnology Research ISSN: 2413-3256-Print ISSN: 2413-8878,
Academic Research Publishing Group –ARPG https://arpgweb.com/journal/journal/16/16/aims
[5] Editeur : Non-Metallic Material Science, ISSN: 2661-3301, Bilingual Publishing Co.
http://ojs.bilpublishing.com
14. Journals Reviewer
[1] Acta Biomaterialia (ELSEVIER)
[2] Transaction of non ferrous society of china (ELSEVIER)
[3] Journal of the Brazilian Society of Mechanical Sciences and Engineering (Springer)
[4] Environmental Science and Pollution Research – Springer
[5] Journal of the Brazilian Society of Mechanical Sciences and Engineering, Journal – Springer
[6] Materials Science and Engineering: C – Journal – Elsevier
[7] Metallurgical and materials transaction A, Journal – Springer
[8] Journal of biomedical materials research part B: Biomaterials – Wiley Online Library
[9] Journal of Measurement Journal – Elsevier
[10] Annual Research & Review in Biology
[11] Bioinspired, Biomimetic and Nanobiomaterials (ICE, ISI WOS).
[12] Tribology in industry.
[13] Solid State Phenomena
[14] Diffusion defect Forum
[15] Diffusion in Materials.
[16] Asian Journal of Research in Medical and Pharmaceutical Sciences
[17] Industrial Lubrication and Tribology
[18] Journal of basic and basic applied research international
[19] Asian journal of Biology
11
[20] Journal of Disease and Global Health
[21] British Microbiology research journal
[22] Journal of Biochemistry International.
[23] British Journal of Medicine and Medical Research
[24] International Research Journal of Pure and Applied Chemistry
[25] International Journal of Medical and Pharmaceutical Case Reports
[26] International Journal of Tropical Disease & Health.
[27] Microbiology Research Journal International.
[28] Advances in Materials (Science Publishing Group).
[29] Journal of Advances in Microbiology.
[30] Asian Journal of Chemical Sciences.
[31] Biotechnology Journal International.
[32] Journal of Nanoresearch
[33] Chemical Science International Journal
[34] Journal of Advances in Biology & Biotechnology.
[35] Asian Plant Research Journal
[36] Journal of Scientific Research and Reports
[37] Journal of Advances in Mathematics and Computer Science.
[38] Advances in Research
[39] Current Journal of Applied Science and Technology
[40] Asian Plant Research Journal.
[41] Asian Journal of Research in Medical and Pharmaceutical Sciences
15. International Technical committee member
a. Editorial board
[1] The 4th Annual International Conference on Material Engineering and Application, Wuhan
china 15-17th December 2017. http://www.icmea2017.org/?op=committee [ICMEA2017].
[2] The 5th Annual International Conference on Material Engineering and Application, December,
14th-16th, 2018, Wuhan, China. http://www.icmea2018.org/?op=committee [ICMEA2018].
[3] 2018 2nd International Conference on Mechanical Design, Manufacture and Automation
Engineering (MDMAE2018) July 24-25, 2018 Xi’an, China
http://www.mdmae2018.org/com.html General chair
[4] 2018 International Conference on Computer, Communications and Mechatronics Engineering
(CCME2018), December 22-23, 2018, Shanghai, China. http://www.ccme2018.org/com.html
General chair
[5] 7th Annual International Conference on Material Science and Engineering (ICMSE2019) April
19-20, 2019 / Wuhan, Hubei, China. http://www.icmse2019.org/?op=committee
12
b. Reviewer
[1] The 4th Annual International Conference on Material Engineering and Application, Wuhan
china 15-17th December 2017. http://www.icmea2017.org/?op=committee [ICMEA2017].
[2] Third International Conference on Science, Engineering & Environment (SEE), USQ, Brisbane,
Australia, 13-16th Novmber 2017, ISBN: 978-4-9905958-9-0 C3051
http://www.confsee.com/tpc.htm
[3] The 6th Global Conference on Materials Science and Engineering October 24th – 27th, 2017,
Beijing, China (CMSE 2017) http://www.cmseconf.org/2017/Committee.html
[4] International Conference on Energy, Engineering and Environmental Protection (eeep 2017)
December 15th-17th, 2017 in Guangzhou, China. http://www.eeep2017.com/?op=committee
[5] 5th International Conference on Machine Design and Manufacturing Engineering
(ICMDME2018. Jannury 22-23, 2018, Jakarta, Republic of Indonesia.
http://www.icmdme.org/comm.html
[6] International Conference on Material Strength and Applied Mechanics (MSAM 2018) April
10th-13th Kitakyushu, City japan www.msamconf.org
[7] 2nd International Conference on Computer, Mechatronics and Electronic Engineering
(CMEE2017), which will be held on December 24-25, 2017, Xiamen,
China.http://www.cmee2017.org/com.html. contact conf@cmee2017.org.
[8] Materials-USA. International Conference and Exhibition on Materials & Engineering (ICEME2018). 7- 9 February 2018, San Diego, United States.
http://helicsgroup.net/index.php/user/conference/Materialscience/7
[9] Mechanical, Automation and Applied Mechanics Conference; MAAM2018. February 7-8,
2018. WUHAN, CHINA. http://www.maam2018.org/com.html
[10] 2018 International Conference on Modeling, Simulation and Optimization (MSO2018) January
21-22, 2018. Shenzhen, China http://www.mso2018.org/com.html
[11] 2018 International Conference on Material Engineering (ICME2018) August 17-19, 2018 held
in Nanjing, China, http://www.iwme2018.org/?op=committee.
[12] 2018 International Conference on Power, Energy and Environmental Engineering
(ICPEEE2018), which will be held on February 7-8, 2018 in Wuhan, China.
http://www.icpeee2018.org/com.html
[13] 2018 International Conference on Material Strength and Applied Mechanics (MSAM 2018)
April 10th to 13th, 2018 in Kitakyushu City, Japan .
[14] 2018 6th International Conference on Metallurgy Technology and Materials (6th
ICMTM2018) May 30-31, 2018|Xian, China http://www.icmtm.org/pages/committee.html.
[14] 2019 7th International Conference on Metallurgy Technology and Materials (7th
CMTM2018)June 14-15,2019 in Xiamen, China http://www.icmtm.org/pages/committee.html
[15] The 2018 International Conference on Mechanical Engineering and Materials [ICMEM2018]
June 22nd-24th, 2018, Suzhou, China. http://www.icmem2018.org/?op=committee
[16] The 2018 international academic convention concerning Electrical, Control and Mechanical
Engineering, April 22-23, 2018 BEIJING CHINA, http://www.ecme2018.org/com.html I.
[17] 2018 international conference on Energy, Power and Materials Engineering, April 22-23, 2018
BEIJING CHINA http://www.epme2018.org/com.html.
[18] 3rd International Conference on Science, Engineering & Environment (SEE), USQ, Brisbane,
Australia, 13-16th Novmber 2017, ISBN: 978-4-9905958-9-0 C3051
http://www.confsee.com/tpc.htm
13
[19] 4th International Conference on Science, Engineering & Environment (SEE), USQ, SEENAGOYA 2018, Japan, 12-14th Novmber 2018, ISBN: 978-4-909106018C3051
http://www.confsee.com/tpc.htm
[20] 2018 3rd International Conference on Electrical, Automation and Mechanical Engineering
(EAME2018) June 24-25, 2018 in Xi’an, China. http://www.eame2018.org/com.html.
[21] 2018 international conference on Applied Mechanics, Mechatronics and Materials,
(AMMM2018) AUGUST 26-27, 2018 BIJING, CHINA http://www.ammm2018.org/com.html
[22] 2018 4th International Conference on Mechanical Structures and Smart Materials
(4th ICMSSM2018) September 22-23, 2018 in Shenzhen, China.
http://www.icmssm.org/comm.html/
[22] 2019 5th International Conference on Mechanical Structures and Smart Materials
(4th ICMSSM2018) May 27-28, 2019 in Xi’AN, China. http://www.icmssm.org/comm.html/
[23] 2017 3rd International Conference on Green Materials and Environmental Engineering
(GMEE2017), October 22-23, 2017, Beijing, China http://www.gmee2017.org/com.html
[24] 2018 4th International Conference on Mechanical Structures and Smart Materials (4th
ICMSSM2018), September 22-23, 2018 in Shenzhen, China.
http://www.icmssm.org/pages/committee.html
[25] 2018 4th International Conference on Applied Mechanics and Mechanical Automation
(AMMA2018), October 28-29, 2018, in Beijing, China. http://www.amma2018.org/com.html
[26] 2018 International Conference on Advanced Functional Materials and Composites
(ICAFMC2018) September 5-6, 2018 in Barcelona, Spain.
http://www.icafmc.org/pages/committee.html
[27] 2018 International Conference on Novel Functional Materials (ICNFM2018), September 16-
18, 2018 in Anshan, China. http://www.icnfm.org/committee.html;
[28] 2017 4TH International Conference on Green Materials and Environmental Engineering
(GMEE2018), October 28-29, 2018, Beijing, China http://www.gmee2018.org/com.html
[29] The 2nd annual International conference on Control Engineering and Mechanical Design
[CEMD2018] October 19th-21st, 2018 Guilin, China
http://www.cemd2018.org/?op=committee
[30] The 2nd annual International conference on advanced education and Management Sciences
(AEMS2018) December 22th-23th, 2018 Shanghai, China http://www.aems2018.org/com.html
[31] International conference on ¨Power Energy and Materials Engineering (PEME 2018)
December 22th-23th, 2018 Shanghai, China. http://www.peme2018.org/com.html
[32] The 2019 5th International Conference on Materials, Mechanical Engineering and Automation
Technology (MMEAT2019) March 15-17 in Wuhan, China.
https://www.keoaeic.org/MMEAT2019/committee.
[33] 7th Annual International Conference on Material Science and Engineering (ICMSE2019) April
19-20, 2019 / Wuhan, Hubei, China. http://www.icmse2019.org/?op=committee
[34] The 8th International Conference on Biomedical Engineering and Biotechnology (ICBEB
2019) October 22-25, 2019, Seoul, Republic of Korea.
[35] 2019 3rd International Conference on Biomedical Engineering and Bioinformatics (ICBEB
2019) September 25-27, 2019 | Penang, Malaysia, http://www.icbeb.net/com.html
14
16. Nationals Conferences
[1] Mamoun FELLAH, Naouel HEZIL, Amel ZAIRI, Mohammed Zine TOUHAMI, Mohammed
ABDUL SAMAD, Alex MONTAGNE, Stephania KOSMAN, Alberto MEJIAS, Alain IOST,
“Influence of Porosity on Microstructure and Corrosion Resistance of Ball Milled Porous Ti–Mo
Alloys For Biomedical Applications”. Journée Nationale, Etude des Matériaux : Elaboration
et Modélisation, JEMEM’2018, 13 Décembre 2018, Guelma Algérie (2018). http://lca.univguelma.dz/fr/content/communications-nationales.
[2] Naouel HEZIL, Mamoun FELLAH, Alex MONTAGNE, Amel ZAIRI, Mohammed Zine
TOUHAMI, “Etude de l’effet du tensioactif anionique sur la synthese d’une alumine γ à partir
de la kaolinite. Journée Nationale, Etude des Matériaux : Elaboration et Modélisation”,
JEMEM’2018, 13 Décembre 2018, Guelma Algérie (2018). http://lca.univguelma.dz/fr/content/communications-nationales.
[3] Fahima GUERRAB, Mamoun FELLAH, Naouel HEZIL, Amel ZAIRI, Mohammed Zine
TOUHAMI, Mohammed ABDUL SAMAD, Alex MONTAGNE, Stephania KOSMAN, Alberto
MEJIAS, Alain IOST, ” Friction and wear behavior of milled Titaniuom Alloys Ti-6Al-7Nb as
function of milling time” For Biomedical Applications.Journée Nationale, Etude des Matériaux :
Elaboration et Modélisation, JEMEM’2018, 13 Décembre 2018 Guelma Algérie (2018).
http://lca.univ-guelma.dz/fr/content/communications-nationales
[4] Ziad DJAFIA, Mamoun FELLAH, Naouel HEZIL, Mohammed ABDUL SAMAD, Amel
ZAIRI, Alex MONTAGNE, Alberto MEJIAS, Stephania KOSMAN, Mythili PARAKASAM,
“Effect of sintering temperature on friction and wear behavior of low modulus Ti-20Nb alloy”.
Journée Nationale, Etude des Matériaux : Elaboration et Modélisation, JEMEM’2018, 13
Décembre 2018, Guelma Algérie (2018). http://lca.univ-guelma.dz/fr/content/communicationsnationales
[5] Mamoun FELLAH, Naouel HEZIL, Mohammed ABDUL SAMAD, Mohammed Zine
TOUHAMI, Alex MONTAGNE, Aalin IOST, Alberto MEJIAS, Stephania KOSSMAN,
“Sliding friction and wear behavior of Hot Isostatically Pressed Ti- Ni alloys”. Journées
Scientifique sur les Sciences et l’Engineering JSSE’2018, 9 et 10 Décembre 2018 Enp
Constantine Algérie (2018). http://www.enp-constantine.dz/journees-scientifiques-sur-lessciences-et-lengineering-jsse18/
[6] Naouel HEZIL, Mamoun FELLAH, Alex MONTAGNE, Aalin IOST, « Assessment of the
hydrophilicity and characterization of alumina oxidized at different temperatures”, Journées
Scientifique sur les Sciences et l’Engineering JSSE’2018, 9 et 10 Décembre 2018 Enp
Constantine Algérie (2018). http://www.enp-constantine.dz/journees-scientifiques-sur-lessciences-et-lengineering-jsse18/
[7] Mamoun FELLAH, Khaled TOUALBIA, Naouel HEZIL, Mohammed ABDUL SAMAD, Alex
MONTAGNE, Alain IOST, Alain LARGETAU, Mythili PRAKASAM, “Effect of Mo (%)
content on friction and wear behavior of β type biomaterials Alloys ( Ti-Mo)”. 1èr Séminaire
National de Physique et Chimie des Matériaux (SNPCM1’2018), 28-29 Novembre 2018 –
ENSET- Azzaba Skikda (2018). http://www.ensetskikda.dz/index.php/snpcm1%E2%80%992018.html
[8] Mamoun FELLAH, Naouel HEZIL, Mohammed Ben Nasser, Alex Montagne, Alain Iost, Alain
Largeteau, Mythili Prakasam, “Effect of Al (at.%) content on tribological performances of RF
Sputtered Chromium Aluminum Nitrides Coating”. 1èr Séminaire National de Physique et
Chimie des Matériaux (SNPCM1’2018), 28-29 Novembre 2018 – ENSET- Azzaba Skikda
(2018). http://www.enset-skikda.dz/index.php/snpcm1%E2%80%992018.html
[9] Mamoun FELLAH, HEZIL Naouel, Mohammed Zine TOUHAMI, Mohammed ABDUL
SAMAD4
, Alex MONTAGNE, Alain IOST, Stephania KOSMAN, Alberto MEJIAS, Alain
LARGETEAU, “Structural and Physical properties of RF Sputtered Chromium Aluminum
15
Nitrides Coatings as a function Al (%) addition”. 1èr Séminaire National de Physique et Chimie
des Matériaux (SNPCM1’2018), 28-29 Novembre 2018 – ENSET- Azzaba Skikda (2018).
http://www.enset-skikda.dz/index.php/snpcm1%E2%80%992018.html.
[10] Naouel HEZIL, Mamoun FELLAH, Amel ZAIRI, Mohammed Zine TOUHAMI Synthesis,
“structural and physical properties of nano bioceramic (α-Al2O3)”. 1èr Séminaire National de
Physique et Chimie des Matériaux (SNPCM1’2018), 28-29 Novembre 2018 – ENSET- Azzaba
Skikda (2018). http://www.enset-skikda.dz/index.php/snpcm1%E2%80%992018.html
[11] Naouel HEZIL, Mamoun FELLAH, Amel ZAIRI, Mohammed Zine TOUHAMI, “Synthesis,
Structural and Characterization of intercalated hydrothermel Clay”, 1èr Séminaire National de
Physique et Chimie des Matériaux (SNPCM1’2018) 28-29 Novembre 2018 – ENSET- Azzaba
Skikda (2018). http://www.enset-skikda.dz/index.php/snpcm1%E2%80%992018.html
[12] Linda AISSANI, Mamoun FELLAH, Ahlam BELGROUN, Lamia RADJHI, Hanane
LAMRAOUI, Akram ALHUSSSEIN, “Caracterisation avec rayonnement X de nitrure de
chrome déposés par pulvérisation cathodique magnétron“,1èr Séminaire National de Physique et
Chimie des Matériaux (SNPCM1’2018) 28-29 Novembre 2018 – ENSET- Azzaba Skikda (2018).
http://www.enset-skikda.dz/index.php/snpcm1%E2%80%992018.html.
[13] Mamoun FELLAH, Naouel HEZIL, Mohammed Zine TOUHAMI, Mohammed ABDUL
SAMAD, Alex MONTAGNE, Amel ZAIRI, Alain IOST. “Corrosion susceptibility of implant
materials Ti–6Al–4V and Ti–6Al–4Fe in artificial extra-cellular fluids”, 1ère Journée nationale
Sur les Energies Renouvelables et les Matériaux Avancés, JNEREMA ‘2018, 13 novembre
2018 Oum El Bouaghi Algeria (2018). http://www.univ-oeb.dz/la-1ere-journee-nationale-enenergie-renouvelables-et-materiaux-avances/
[14] Naouel HEZIL, Mamoun FELLAH, Amel ZAIRI, Mohammed Zine TOUHAMI, Alex
MONTAGNE, Alain IOST, “Removal of Fe (II) from water onto activated carbon by adsorption
in Dynamic Mode”. 1ère Journée nationale Sur les Energies Renouvelables et les Matériaux
Avancés, JNEREMA ‘2018. 13 novembre 2018, Oum El Bouaghi Algeria (2018).
http://www.univ-oeb.dz/la-1ere-journee-nationale-en-energie-renouvelables-et-materiauxavances/
[15] Naouel HEZIL, Mamoun FELLAH, “degradation of organic polluant by Advanced oxydation
using the Fenton system Fe(II) /H2O2”, conference nationale sur les risques industriels et
environnement CRIE’2018’ 17-18 Octobre 2018, Skikda Algérie (2018) http://conferences.univskikda.dz/cnrie2018/
[16] Mamoun FELLAH, Naouel HEZIL, “Removal of Cr(VI) from water onto activated carbon by
adsorption in dynamic mode, conference nationale sur les risques industriels et environnement
CRIE”, 17-18 Octobre 2018, Skikda Algérie (2018). http://conferences.univskikda.dz/cnrie2018/
[17] Linda AISSANI, Mamoun FELLAH, Corine NOUVEAU, “Caractérisation structurale et
mécaniques des couches minces a base de carbure de chrome déposé par PVD”. Journée
d’études ‘ Nanomatériaux et leurs Applications pour le Développement Durable, 19 Avril 2018,
Oum El Bouaghi Algérie (2018). http://www.univ-oeb.dz/news/nanomateriaux-et-leursapplications-pour-le-developpement-durable/
[18] Linda AISSANI, Mamoun FELLAH, Corine NOUVEAU, “Etude des proprietés strycturales
des couches minces de Cr-V-N”. Séminaire sur la Technologie des Matériaux et Applications.
SNTMA‘ 2018, 19 Février 2018, El Oued Algerié (2018). https://www.univeloued.dz/images/adab/Log2018/d%C3%A9pliant_5.pdf
16
17. Internationals Conferences
[1] Hezil Naouel, FELLAH Mamoun, Characterization of alumina-γprepared from thermal
activated kaolinite, 6ème Journées Franco-Maghrébines – Caractérisation des matériaux
complexes (JSFM-CMC) (16-18 November 2019), Annaba Algeria (2019).
[2] HEZIL Naouel, FELLAH Mamoun, Hydrophilic/hydrophobic balance of Alumina oxidized at
high Temperatures, 6ème Journées Franco-Maghrébines – Caractérisation des matériaux
complexes (JSFM-CMC) (16-18 November 2019), Annaba Algeria (2019).
[3] M. Fellah, N. Hezil, M. Abdul Samad, Lakhdar Laouar, S. Kossman7
, A. Montagne7
, A.
Mejias7
, A. Iost7
, A. Obrosov8
and S. Wiess8 , Investigating the effect of sintering temperature on
structural and tribological Properties of a nanostructured Ti-Nb-Zr Alloy for biomedical
application. 6ème Journées Franco-Maghrébines – Caractérisation des matériaux complexes
(JSFM-CMC) (16-18 November 2019), Annaba Algeria (2019)
[4] M. Fellah, N. Hezil, M. Abdul Samad, M. Abdurabou Hussein, R. Djellabi, A. Montagne, A.
Mejias, S. Kossman, A. Iost, A. Obrosov and S. Wiess, Effect of sintering temperature on
structural and mechanical Properties of a nanostructured Ti-Ni Alloy for biomedical
application. 6ème Journées Franco-Maghrébines – Caractérisation des matériaux complexes
(JSFM-CMC) (16-18 November 2019), Annaba Algeria (2019)
[5] HEZIL Naouel, FELLAH Mamoun, MONTAGNE Alex, IOST Alain, OBROSOV Aleksei,
WEISS Sabine. Synthesis, Characterisation of nano-sized activated alumina synthetized from
kaolinite, 5th International Workshop on thermodynamic of metallic alloys WITAM2019 , Batna,
Novembre 13-14, 2019, Algeria.
[6] Khalil Saloua, FELLAH Mamoun, HEZIL Naouel, L. SMATA, IOST Alain, MONTHAGNE
Alex, MEJIAS Alberto ,KOSMAN Stephania, OBROSOV Aleksei and WEISS Sabien
« Synthèse et caractérisation structurale d’un composé nanostructuré de Ti, Mo et Zr pour
applications biomédicales » 3rd International Conference of Mechanics and Materials
ICMM’2019. 11-12 November 2019, Setif, Algeria
[7] HEZIL Naouel, FELLAH Mamoun, MONTAGNE Alex, IOST Alain, OBROSOV Aleksei,
WEISS Sabine. Removal of methylene blue from water onto biosorbent based on the leaves of
Ceratonia Siliqua. 3ème conférence méditerranéen biodiversité BIODIV2019, Novembre 01-03,
2019 Hammamet, Tunisia.
[8] FELLAH Mamoun, HEZIL Naouel, MONTAGNE Alex, IOST Alain, OBROSOV Aleksei,
WEISS Sabine; Degradation of methylene blue from water onto activated carbon by adsorption
in dynamic mode. 3ème conférence méditerranéenne de la biodiversité BIODIV2019, Novembre
01-03, 2019. Hammamet, Tunisia.
[9] FELLAH Mamoun, HEZIL Naouel, MONTAGNE Alex, IOST Alain, OBROSOV Aleksei,
WEISS Sabine; Removal of copper from water onto activated carbon by adsorption in dynamic
mode. 3ème conférence méditerranéenne de la biodiversité BIODIV2019, Novembre 01-03,
2019
[10] HEZIL Naouel, FELLAH Mamoun, MONTAGNE Alex, IOST Alain, OBROSOV Aleksei,
WEISS Sabine; Study of the photocatalytic degradation of orange methyl dye in the presence of
titanium dioxide, 3ème conférence méditerranéenne de la biodiversité BIODIV2019, Novembre
01-03, 2019
[11] HEZIL Naouel, FELLAH Mamoun, MONTAGNE Alex, ZAIRI Amel, TOUHAMI Mohamed
Zine, IOST Alain, Assessment of heterogeneity of alumina powder treated at high temperature.
2nd International Conference on Nanomaterials and Their Applications April 27-29t 2019,
Hammamet, Tunisia.
[12] FELLAH Mamoun, HEZIL Naouel, ABDUL SAMAD Mohammed, MONTAGNE Alex,
KOSMAN Stephania, MEGIAS Alberto, IOST Alain, LARGETEAU Alain, PRAKASAM
17
Mythili, Synthesis and Bio-corrosion behavior of nano structured Ti–15Mo alloy for biomedical
applications in various simulated body fluid, 2nd International Conference on Nanomaterials and
Their Applications April 27-29t 2019 , Hammamet, Tunisia.
[13] FELLAH Mamoun, HEZIL Naouel, ABDUL SAMAD Mohammed, MONTAGNE Alex,
KOSMAN Stephania, MEGIAS Alberto, IOST Alain, OBROSOV Aleksei, WEIß Sabine,
Biotribocorroion behaviour of newly developed nanostructured near β-types Titanium based
Alloys for Biomedical Applications. 2nd International Conference on Nanomaterials and Their
Applications April 27-29t 2019, Hammamet, Tunisia
[14] SAOUDI Adel, FELLAH Mamoun, HEZIL Naouel, DEKHIL Leila, TOUHAMI Mohamed
Zine, GRAIRAYA said, IOST Alain, Investigation of the effect of milling time on structural,
friction and wear behavior of hot issostaticlly pressed Ti-Ni Alloys. 2nd International Conference
on Nanomaterials and Their Applications April 27-29t 2019, Hammamet, Tunisia.
[15] SAOUDI Adel, FELLAH Mamoun, HEZIL Naouel, LAHOUEL Ali, Investigation of
structural properties in nanobioceramics. 2nd International Conference on Nanomaterials and
Their Applications April 27-29t 2019, Hammamet, Tunisia.
[16] HENNECHI Bouzid, FELLAH Mamoun, HEZIL Naouel, ASSALA Omar, Fethia
BOUAKSA, KOSMAN Stephania, MEjIAS Alberto, MONTAGNE Alex, IOST Alain, Change
in mechanical properties of hot issostaticelly pressed α-Al2O3 at different milling times. 2nd
International Conference on Nanomaterials and Their Applications April 27-29t 2019,
Hammamet, Tunisia.
[17] HAMMADI Fouzia, FELLAH Mamoun, HEZIL Naouel, TOUHAMI Mohamed Zine,
KOSMAN Stephania, MEJIAS Alberto, MONTAGNE Alex, IOST Alain, LARGETEAU Alain,
PRAKASAM Mythili, Investigation of milling time on Ti-6A1-4Fe alloy microstructure and
properties. 2nd International Conference on Nanomaterials and Their Applications April 27-29t
2019, Hammamet, Tunisia.
[18] BOUAKSA Fethia, FELLAH Mamoun, ‘Effect Of Grain Size On The Mechanical Properties
Of 42cd4 Steel By The Thermocyclic Method’, The Fourth International conference on
Mechanics and Energy, ICME 2018, 20-22, December 2018, Hammamet Tunisia
[19] GUIZANI, Hichem, NASSER Mohamed, FELLAH Mamoun, ‘Trempe superficielle des
tiges d’amortisseur automobiles en AISI 1017, Optimisation par plan d’expérience’, 4ème
Edition du congrès tunisien de mécanique (COTUME’2018), 13 -15 octobre 2018, El
Hammamet, Tunisia.
[20] Mamoun FELLAH, Naouel HEZIL, Mohammed ABDUL SAMAD, Alex MONTAGNE,
Stephania KOSMAN, Alberto MEJIAS, Alain IOST, Alain LARGETEAU, Mythili
PRAKASAM, Electrochemical Characterizations of Biomedical Alloys SS AISI 316L For
Surgical Implants In Simulated Body Fluids, The first International Conference on
Electrochemical Science and Technology (ICEST 2018), 27 & 28 October 2018, Setif. Algeria
(2018).
[21] Naouel HEZIL, Mamoun FELLAH, Mohammed ABDUL SAMAD, Alex MONTAGNE,
Stephania KOSMAN, Alberto MEJIAS, Alain IOST, Alain LARGETEAU, Mythili
PRAKASAM, Caractérisation Electrochimique d’un Alliage à Base de Plomb de Récupération.
The first International Conference on Electrochemical Science and Technology (ICEST 2018),
27 & 28 October 2018, Setif Algeria (2018).
[22] Naouel HEZIL, Mamoun FELLAH, Mohammed ABDUL SAMAD, Alex MONTAGNE,
Stephania KOSMAN, Alberto MEJIAS, Alain IOST, Alain LARGETEAU, Mythili
PRAKASAM, Electrochemical Behavior of Ti–6Al7Nb Alloy for Total Hip Prosthesis
Applications. The first International Conference on Electrochemical Science and Technology
(ICEST 2018), 27 & 28 October 2018 Setif Algeria (2018).
18
[23] Mamoun FELLAH, Naouel HEZIL, Lakhdar LAOUAR, Amel ZAIRI, Alain LARGETEAU,
Mythili PRAKASAM, Alex MONTAGNE, Alain IOST, Effect of Zr content on friction and
wear behavior of Cr-Zr-N coating system. 5ème Journées Franco-Maghrébines – Caractérisation
des matériaux complexes (JSFM-CMC) 22-24 October 2018, pages 119-123, Hammamet
Tunisie (2018).
[24] Mamoun FELLAH, Naouel HEZIL, Lakhdar LAOUER, Mohammed BEN NASSER,
Stephania KOSSMAN, Alberto MEJIAS, Alex MONTAGNE, Alain IOST, Tribologiceal
behaviour of Nanostructured β-Ti alloys as a function of Mo at.% content”. 5ème Journées
Franco-Maghrébines – Caractérisation des Matériaux Complexes (JSFM-CMC) 22-24 October
2018, pages 284-287. Hammamet Tunisie (2018).
[25] Mamoun FELLAH, Naouel HEZIL, Mohamed ZINE TOUHAMI, Lakhdar LAOUER, Said
MECHACHTI, Stephania KOSSMAN, Alberto MENJIAS , effect of sintering temperature on
tribological behavior of β-types ti-mo alloy with low modulus. 5ème Journées FrancoMaghrébines – Caractérisation des Matériaux Complexes (JSFM-CMC) 22-24 October 2018,
pages 288-291. Hammamet Tunisie (2018).
[26] Fatima ALLOUCHE, D. BENLACHEB, Mamoun FELLAH, Naouel HEZIL, The new hybrid
materials and the effect of H-bond, 5ème Journées Franco-Maghrébines – Caractérisation des
Matériaux Complexes (JSFM-CMC) 22-24 October 2018. Page 176-180. Hammamet Tunisie
(2018).
[27] Naouel HEZIL, Mamoun FELLAH, Kamel GUERFI, Lakhder LAOUR, Amel ZAIRI, Alex
MONTAGNE, Alain IOST, Alain LARGETEAU, Mathyli PRAKASAM, Differential thermal
and thermogravimetric analysis of à clay material of hydrothermal origine,
5ème Journées Franco-Maghrébines – Caractérisation des matériaux complexes (JSFM-CMC)
22-24 october 2018, page 248-250, Hammamet Tunisia (2018).
[28] Fouzia HAMMADI, Mamoun FELLAH, Touhami MOHAMED ZINE, Abdelaziz
BOUCHELAGHEM., Stephania KOSSMAN, Alain LARGETEAU, Microstructure and
mechanical properties of Ti–6Al-4V alloy for biomedical application. 5ème Journées FrancoMaghrébines – Caractérisation des matériaux complexes (JSFM-CMC) (22-24 october
2018), Hammamet Tunisia (2018).
[29] Bouzid HANNACHI, Mamoun FELLAH, Naouel HEZIL, Omar ASSALA, Fethia
BOUAKSSA, Stephania KOSSMAN, Alberto MEJIAS, Alex MONTAGNE, Alain IOST,
Amélioration des propriétés mécaniques par pression hydrostatique à chaud d’une céramiques
α-Al2O3 pour arthroplastie totale de la hanche (THA). 5ème Journées Franco-Maghrébines –
Caractérisation des Matériaux Complexes (JSFM-CMC) (22-24 October 2018). Pages 292-
299 Hammamet Tunisia. (2018)
[30] Faycel KHADRAOUI, Rabeh MENAA, Mamoun FELLAH, Etude de l’endommagement
surfacique d’une poutre sandwich, Carbone/Céramique, (C/ SiC) Sous sollicitations
thermomécaniques. 5ème Journées Franco-Maghrébines – Caractérisation des matériaux
complexes (JSFM-CMC) (22-24 october 2018). Pages 159-201 Hammamet Tunisia (2018).
[31] Linda AISSANI, Mamoun FELLAH, Lamia RADJHI, Mouhamed Said BOUAMRANE,
Corinne NOUVEAU, Akram ALHUSSEIN, Structural and mechanical properties of the
annealed Vanadium nitrides thin films. Second International Workshop on Magnetic Materials &
Nanomaterials – 01 – 04 October 2018. Boumerdes Algeria (2018).
[32] Fouzia HAMMADI, Mamoun FELLAH, Linda AISSANI, Mohamed Zine TOUHAMI, Alain
LARGETEAU , ALBERTO MENJIAS, Influence of Fe content on tribologic properties of α-β
type Ti-6Al-xFe powders prepared by mechanical milling. The International Conference On
Materials Science (ICMS2018) 12-14 September 2018, Setif Algeria (2018).
[33] Mamoun FELLAH, Naouel HEZIL, Mohammed ABDUL SAMAD, Alex Montagne,
Stephania Kosman, Alberto Megias, Alain Iost, Alain Largeteau, Mythili Prakasam, Effect of
calcination temperature on wear resistance of nanosized alumina alpha for biomedicals
19
applications. International Conference on Materials Science (ICMS2018), 12-14 September
2018, Setif Algeria (2018).
[34] Mamoun FELLAH, Naouel HEZIL, Mohammed ABDUL SAMAD, Alex Montagne,
Stephania Kosman, Alberto Megias, Alain Iost, Alain Largeteau, Mythili Prakasam, Physical
and Tribological Proprieties of RF Sputtered Chromium Aluminum Nitrides Coatings,
International Conference on Materials Science (ICMS2018), 12-14 September 2018, Setif
Algeria (2018).
[35] Mamoun FELLAH, Khaled TOUALBIA, Naouel HEZIL, Mohammed ABDUL SAMAD,
Amel ZAIRI, Alex MONTAGNE, Alberto MENGIAS, Stephania KOSMAN, Alain IOST, The
effect of molybdenum content on structural, mechanical and tribological properties of HIPed βtype titanium alloys for orthopedic applications. International Conference on Materials Science
(ICMS2018), 12-14 September 2018, Setif Algeria (2018).
[36] Mamoun FELLAH, Ziad DJAFIA, Naouel HEZIL, Mohammed ABDUL SAMAD, Amel
Zairi, Alex MONTAGNE, Alberto MEGIAS, Stephania KOSMAN, Alain IOST, Alain
LARGETEAU, Effect of Nb at.% content on friction on tribological behaviour of
nanobiomaterials Ti-Nb alloys. International Conference on Materials Science 2018
(ICMS2018), 12-14 September 2018, Setif Algeria (2018).
[37] Linda AISSANI, Mamoun FELLAH, Lamia RADJHI, Ahlem Boulegroun, Akram
ALHUSEINE, Improvement of the hardness and wear resistance of chromium nitride by adding
the Zrecinium, International Conference on Materials Science (ICMS2018), 12-14 September
2018, Setif Algeria (2018).
[38] HAMMADI Fouzia, FELLAH Mamoun, HEZIL Naouel, TOUHAMI Mohamed Zine,
Mechanicla and tribological proprietés of Ti6Al4Fe Alloy, 2nd international conference on
tribology, TURKEYTRIB’18. 18-20 April 2018, Page 4-10. Istanbul Turqy (2018).
[39] HEZIL Naouel, FELLAH Mamoun, ABDUL SAMAD Mohamed, TOUHAMI Mohamed
Zine, DEKHIL Leila, MONTAGNE Alex, IOST Alain, Effect of Al Content on tribological
Behavior of Cr-Al-N Coating system. 2nd international conference on tribology,
TURKEYTRIB’18, 18-20 April 2018, Page 19 Istanbul Turqy (2018).
[40] ASSALA Omar, FELLAH Mamoun, Mounia Belaid, “Sliding Friction and wear performance
of the nano-bioceramic α-Al2O3 prepared by high energy milling. Proceeding Book of Second
international conference on advances in sciences: ICAS 2017 September 13-15, 2017 TURQEY,
(2017) Istanbul, Turqy (2018).
[41] FELLAH Mamoun, HANNACHI Bouzid, AISSANI Linda, ABDUL SAMAD Mohammed,
ASSALA Omar, “Hot isostatic pressing (HIP) of α-Al2O3 submicron ceramics pressure less
milled at differente milling times”. Colloque international sur les materiaux et leurs applications
(CIMA’2017) 29-31 octobre 2017 khenchela, Algérie (2017).
[42] AISSANI Linda, FELLAH Mamoun, MECHERI Nacira, ‘Caractérisation des couches minces
à base de chrome par pulvérisation magnétron cathodique’. Colloque international sur les
matériaux et leurs applications (CIMA’2017) 29-31 octobre 2017 khenchela, Algérie (2017).
[43] HAMMADI Fouzia, FELLAH Mamoun, AISSANI Linda, TOUHAMI Mohamed zine,
“Friction and wear Behavior of Titanium alloys for biomedical Applications”. Colloque
international sur les materiaux et leurs applications (CIMA’2017) 29-31 octobre 2017 khenchela,
Algérie (2017
[44] GUERRAB Fahima, FELLAH Mamoun, AISSANI Linda, Djbaili Hamid, ABDUL SAMAD
Mohammed, TOUHAMI Mohammed Zine, “Effect of milling time on sliding friction and wear
behavior of hot isostatically pressed titanium alloys Ti-6Al-4X(X=V, Nb & Fe) for biomedical
applications”. Colloque international sur les materiaux et leurs applications (CIMA’2017) 29-31
octobre 2017 khenchela, Algérie (2017)
20
[45] GUERRAB Fahima, FELLAH Mamoun, ABDUL SAMAD Mohammed, “Hot isostatic
pressing (HIP) of α-Al2O3 submicron ceramics pressure less milled at differente milling times,
improvement in mechanical proprieties for use in total hip arthoplastie (THA)”. First Arab
Conferences Mechanical Engineering (ARMCE’17) December 10th & 11th, 2017, Biskra,
Algeria. (2017).
[46] HAMMADI Fouzia, FELLAH Mamoun, AISSANI Linda, TOUHAMI Mohamed zine,
“Development and therapeutic applications of advanced biomaterials titanium alloys”. First Arab
Conferences Mechanical Engineering (ARMCE’17) December 10th & 11th, 2017, Biskra,
Algeria. (2017).
[47] AISSANI Linda, FELLAH Mamoun, NOUVEAU Corinne, MONTAGNE Alex, « the
thermal treatement effect on the structural and mechanical proprieties of V-N Coatings. First
Arab Conferences Mechanical Engineering (ARMCE’17) December 10th & 11th, 2017, Biskra,
Algeria. (2017).
[48] FELLAH Mamoun, BOUAKSSA Fethia, TOUHAMI Mohamed Zine, MECHACHETI Said,
MONTAGNE Alex, IOST Alain and NOUVEAU Corrine, “Investigation of new titanium alloys
for biomedical application”. First Arab Conferences Mechanical Engineering (ARMCE’17)
December 10th & 11th, 2017, Biskra, Algeria. (2017).
[49] FELLAH Mamoun, AISSANI Linda, ALLAOUI Abdelhalim, MECHACHETI Said,
ABDUL SAMAD Mohammed, MONTAGNE Alex. “Experimental study of new titanium alloy
Ti-6Al-4Fe for biomedical Application”3ème Conférence Internationale de Mécanique
(ICM’2017), 26 & 27 avril 2017. (2017) Annaba ˗ Algeria.
[50] FELLAH Mamoun, AISSANI Linda, LABAIZ Mohamed, BENNASSER Mohammed,
ABDUL SAMAD Mohammed, ZAIRI Amel, “Etude métallurgique et électro himique d’une
tige fémorale en acier inoxydable austénitique AISI 316L”. 3ème Journées Franco-Maghrébines
– Caractérisation des matériaux complexes (JSFM-CMC) à Thiais page 237-241. (28-30
novembre 2016) (France)
[51] FELLAH Mamoun, AISSANI Linda, LABAIZ Mohamed, BENNASSER Mohammed,
ABDUL SAMAD Mohammed, ZAIRI Amel, “Effet du milieu sur les paramètres de corrosion
des alliages à base de plomb de deuxième génération”. 3ème Journées Franco-Maghrébines –
Caractérisation des matériaux complexes (JSFM-CMC) à Thiais (28-30 novembre 2016) page
221-224. (France)
[52] AISSANI Linda, FELLAH Mamoun, NOUVEAU Corine, ” Influence de l’épaisseur de film
sur les propriétés des couches minces de carbures de chrome déposées par pulvérisation
cathodique magnétron RF”. 3ème Journées Franco-Maghrébines – Caractérisation des matériaux
complexes (JSFM-CMC) à Thiais (France) page 237-241. (28-30 novembre 2016) page 221-
224.
[53] FELLAH Mamoun, AISSANI Linda, LABAIZ Mohammed, ASSALA Omar, DEKHIL Leila,
IOST Alain “Hot isostatic pressing (HIP) of α-Al2O3 submicron ceramics pressure less milled
at different times: Improvement in mechanical properties for use in total hip arthoplasty (THA”
Journées d’Etudes sur la Fonderie et l’Environnement, JEFE’2016 .Annaba, 10,12 mai 2016.
Algeria.
[54] AISSANI Linda, FELLAH Mamoun, NOUVEAU Corinne, DJEBAILI Hamid “Effet de
L’épaisseur sur les couche minces Cr-N et V-N” Journées d’Etudes sur la Fonderie et
l’Environnement, JEFE’2016 .Annaba, 10-12 mai 2016. Algeria
[55] FELLAH Mamoun, ESSOM Hmida, LABAÏZ Mohamed, “Caractérisation métallurgique et
électrochimique d’un alliage à base de plomb de récupération”. 3ème Conférence Internationale
sur la Maintenance et la Sécurité Industrielle (CIMSI’15). 09-10 novembre 2015, Skikda,
Algérie.
21
[56] FELLAH Mamoun, ASSALA Omar, TALEB Ahlem, LABAÏZ Mohamed, “Comportement
électrochimique d’une prothèse totale de hanche en alliage à base de titane – Ti-6Al-4V”. 3ème
Conférence Internationale sur la Maintenance et la Sécurité Industrielle (CIMSI’15) Skikda (09-
10 novembre 2015) Algérie.
[57] FELLAH Mamoun, ASSALA Omar, LABAÏZ Mohamed, “Caractérisation métallurgique et
tribologique de l’acier AISI 316L et du Ti-6Al-7Nb pour applications biomédicales”. 3ème
Conférence Internationale sur la Maintenance et la Sécurité Industrielle (CIMSI’15).Skikda (09-
10 novembre 2015) Algeria.
[58] SASSENE Nacira, FELLAH Mamoun, “Protection par inhibiteur de corrosion d’un circuit
de refroidissement d’un bac de stockage d’hydrocarbure de Sonatrach”. 3ème Conférence
Internationale sur la Maintenance et la Sécurité Industrielle (CIMSI’15). Skikda, (09-10
novembre 2015) Algeria.
[59] FELLAH Mamoun, LABAIZ Mohamed, LAOUAR Lakhdar, ABDUL SAMAD Mohammed,
ASSALA Omar, ALAIN Iost, “Effect to replacement of V by Nb and Fe on the tribological
behavior of biomedical titanium alloys”. 2èmes Journées Scientifiques Franco-Maghrébines :
Caractérisation des Matériaux Complexes (JSFM-CMC 2015). Laboratoire de Mécanique
Industrielle, Université Badji Mokhtar – Annaba, (10-13 octobre 2015) Algeria.
[60] FELLAH Mamoun, LABAIZ Mohamed, LAOUAR Lakhdar, ABDUL SAMAD Mohammed,
ASSALA Omar, IOST Alain , “Tribological behavior of femoral stem used by SS AISI
316L” 2èmes Journées Scientifiques Franco-Maghrébines : Caractérisation des Matériaux
Complexes (JSFM-CMC 2015). Laboratoire de Mécanique Industrielle, Université Badji
Mokhtar – Annaba, (10-13 octobre 2015) Algeria.
[61] ZERNIZ Nawel, FELLAH Mamoun, “Synthèse et caractérisation structurale des
nanomatériaux (FeAlCr) obtenus par broyage à haute énergie”. 2èmes Journées Scientifiques
Franco-Maghrébines : Caractérisation des Matériaux Complexes (JSFM-CMC 2015). Annaba,
(10-13 octobre 2015) Algeria.
[62] DEKHIL Leila, ZERNIZ Nawel, BOUOUDINA Mohamed, FELLAH Mamoun, A.
Bedboudi, J.M. Grenèche, “Physical study of bionanostructured Ni60-Cr40 material prepared
by mechanical alloying”. International Meeting on Materials for Electronic Application
(IMMEA-2015) Faculty of Sciences and Technology, Caddi Ayyad University – Marrakech,
(09-12 septembre 2015) Morocco.
[63] LABAIZ Mohamed, DERRADJI Fouzia, FELLAH Mamoun, MEDDAH Soumia, “Etude
Tribologique Comparative de Biomatériaux AISI 316L et Ti-4Al-6V”. 22ème Congrès Français de
Mécanique (CFM 2015), Lyon, (24 au 28 Août 2015) France.
[64] FELLAH Mamoun, ZERNIZ Nawal, LABAIZ Mohamed, ASSALA Omar, TALEB Ahlem,
“Synthesis and magnetization studies of nanopowder Fe70Ni20Cr10 alloys prepared by high
energy milling”. 1er Congrès Algérien de Caractérisation, Propriétés et Modélisation de
Matériaux et des Matériaux Composites (CACPM3C-1’2015). Khenchela, (19-21 Mai, 2015)
Algeria.
[65] TALEB Ahlem, LABAÏZ Mohamed, FELLAH Mamoun, GRAÏRIA Amina, IOST Alain,
“Caractérisation physico-chimique et mécanique d’un revêtement de zinc obtenu par
galvanisation industrielle à chaud en continu”. Congrès Matériaux, Fédération Française des
Matériaux (FFM) Montpellier, (24-28 novembre 2014) France.
[66] LABAÏZ Mohamed, FELLAH Mamoun, ASSALA Omar, IOST Alain, “Comportement
tribologique d’un acier AISI 316L et d’un alliage Ti-6Al-7Nb pour prothèse totale de hanche”,
Congrès Matériaux, Fédération Française des Matériaux (FFM) Montpellier, (24-28 novembre
2014) France.
[67] FELLAH Mamoun, LABAÏZ Mohamed, ASSALA Omar, ALAIN Iost, “Comportement
électrochimique de deux prothèses totales de hanche en acier AISI 316L et en alliage de Ti-6A-
22
7Nb”. Congrès Matériaux, Fédération Française des Matériaux (FFM) Montpellier, (24-28
novembre 2014) France.
[68] FELLAH Mamoun, LABAIZ Mohamed et ASSALA Omar, “Friction and wear behavior of
biomedical titanium alloy – Ti-6Al-4V”, International Conference on Corrosion Science and
Engineering (Csae-13), Laboratoire de Métallurgie et Génie des Matériaux, Université Badji
Mokhtar – Annaba, (28-29 Octobre 2013) Algérie.
[69] LABAÏZ Mohamed, FELLAH Mamoun,“Surface Proprieties of Al2O3 ceramics used for
orthopedic biomaterial”. 2nd Euro Mediterranean Conference on Materials and Renewable. From
Nanoscience to Renwebale Energie and Biologie (EMCMRE-2), Centre Interdisciplinaire de
Nanoscience de Marseille (CiNaM) et l’Institut matériaux Microélectronique Nanosciences de
Provence (Im2np) et la ville d’Istres, (10-14 juin 2013) France.
[70] FELLAH Mamoun, LABAÏZ Mohamed, “Caractérisation tribologiques et électrochimique
d’une tige fémorale en acier inoxydable AISI 316L”. 24èmes Journées Internationales
Francophones de Tribologie (JIFT 2012), Arts Et Metiers Paristech Aix En Provence, (9 – 11
Mai 2012) France. http://qnp2012.sciencesconf.org/conference/ jift2012 /boa_fr.pdf page 65-66
[71] FELLAH Mamoun, LABAÏZ Mohamed, “Etude métallurgique et tribologique d’une prothèse
totale de hanche en acier AISI 316L”. The first international conference on mines and metallurgy
CI2M’1, Laboratoire de Métallurgie Physique et Propriétés des Métaux, Université Badji
Mokhtar – Annaba, (10-12 MAI 2010) Algérie.
[72] FELLAH Mamoun, ESSOM Hmida, “Corrosion des alliages à base de plomb de deuxième
génération”, The first international conference on mines and metallurgy CI2M’1 (CI2M’1),
Laboratoire de Métallurgie Physique et Propriétés des Métaux, Université Badji Mokhtar –
Annaba, (10-12 mai 2010) Algérie.
[73] FELLAH Mamoun, LABAÏZ Mohamed, “Etude métallurgique et tribologique d’un Biofilm
d’une prothèse totale de hanche en acier inoxydable AISI 316Lʺ, The First International
Scientific Days on Biofilms (JSIB), Laboratoire de Biofilm et Biocontamination Des Materiaux.
LBBM, Université Badji Mokhtar – Annaba, (30-2 juin 2010) Algeria.
[74] FELLAH Mamoun, LABÏZ Mohamed, ASSALA. Omar, “Evolution du coefficient de
frottement d’une tige fémorale en acier AISI 316L en fonction de la charge et la vitesse de
glissement”, The 2nd international conference of Materials and the environment (CIME),
Laboratoire de Métallurgie et Génie des Matériaux, LMGM, Université Badji Mokhtar – Annaba,
(5-7 Décembre 2010) Algeria.
[75] FELLAH Mamoun, LABAÏZ Mohamed, DJEDDI Noureddine, HIDOUS Ilyes, “Usure des
filières de tréfilage – Causes et Remèdes”. 2nd International conference of welding and non
Destructive Testing- (IC-WNDT-MI’10), Centre de recherche scientifique et technique en
soudage et contrôle CSC, Oran, (27-28 Novembre 2010) Algérie.
https://library.csc.dz/media/articles/2015-04/friction-and-wear-mechanisms-of-biomater20150429102418-663767.pdf
[76] FELLAH Mamoun, LABAÏZ Mohamed, DJEDDI Noureddine, HIDOUS Ilyes, “Friction and
wear mechanisms of biomaterial SS AISI 316L”. 2nd International conference of welding and non
Destructive Testing- (IC-WNDT-MI’10) (IC-WNDT-MI’10), Centre de recherche scientifique et
technique en soudage et contrôle CSC, Oran, (27-28 Novembre 2010) Algérie.
https://library.csc.dz/media/articles/2015-04/frictionand-wear-mechanisms-of-biomater20150429102418-663767.pdf
[77] FELLAH Mamoun, LABAÏZ Mohamed, DJEDDI Noureddine, HIDOUS Ilyes, “Evolution de
coefficient de frottement d’une tige fémorale en acier AISI 316L en fonction de la charge et la
vitesse de glissement”. the first international conference on mechanics (ICM’ 2010),
Département de Génie Mécanique, Université de Constantine, (23- 24 novembre 2010) Algérie.
http://umc.edu.dz/vf/proceeding/icm-international-conference-ofmechanics/ proceeding-icm2010/ICM2010-4.pdf page 465-500.
23
[78] FELLAH Mamoun, LABAÏZ Mohamed, DJEDDI Noureddine, HIDOUS Ilyes, “Solidification
et défauts des billettes ST37-2 de l’aciérie électrique Arcelor Mittal Annaba”. Journées d’Etudes
Nationales de Mécanique (JENM’ 10), Institut des Sciences et Technologie en collaboration
avec le Laboratoire LASPI2A, Centre Universitaire de Khenchela, (20 au 21 octobre 2010)
Algérie.